会计信息质量的非线性模型对公司价值的影响

从时代性、行业性及人力资源价值等方面分析了非线性因素对会计信息质量的影响,认为高质量的会计信息应该反映公司价值,并尝试建立了一个非线性模型,据此大体测算公司价值。     

近距离煤层群采空区漏风规律及防控措施研究

贵州地区煤层赋存条件复杂,煤层间距小,相邻采空区存在漏风通道的问题。采用SF6示踪法及重点区域指标气体数据分析法,对发耳煤矿采空区漏风规律及其治理措施进行研究。分析结果表明,由于相邻密闭效果欠佳,导致31004开切眼联络巷及31004工作面回风巷密闭漏风严重。31004采空区漏风通道主要是31004开切眼联络巷密闭及10^#煤层开采过程中对上部7^#煤层采空区造成二次扰动形成的纵向漏风通道;漏风量为83 m^3/min,采空区风速约为0.17 m/s。对存在的煤自燃隐患采取了注水降温措施,CO体积分数显著下降至(5~9)×10^-6。为即将开采的50105、50107工作面的煤自燃防控提供了科学依据和管控措施方案。     

Hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (αs1-, β- and k-casein) after enzymatic hydrolysis with pepsin and enzymatic extract from Pleurotus eryngii

The aim of this study was to estimate the hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (α_s1-, β- and k-casein) after in vitro digestion with two different enzymatic systems: pepsin from porcine gastric mucosa (EP) and a crude enzymatic extract from the edible mushroom Pleurotus eryngii. The used enzymes showed a different mode of casein catalysis with a consequent production of peptides of different antioxidant activity. The CN haplotype significantly influenced peptides production; in fact, the amino acid substitutions caused by genetic polymorphisms at the α_s1-, β- and k-CN loci influenced the sites of enzymatic cleavage and therefore the produced peptides. The above is evidenced by the different antioxidant activity found in the hydrolysates depending on the used enzymatic system, the CN haplotype, and the CN haplotype × enzymatic treatment interaction. The findings of this study are a perspective for the production of specific foods that exert a biological effect in addition to the nutritional one.     

Discrete-time setpoint-triggered reset integrator design with guaranteed performance and stability

According to Bode's gain-phase relationship, in linear time-invariant controllers, introducing an integral action to eliminate the steady-state error has an adverse effect of increased phase delay and overshoot, leading to performance deterioration. Moreover, increasing the bandwidth of the closed-loop system to enhance the low-frequency disturbance rejection invariably amplifies the sensitivity to high-frequency disturbances. Hence, the performance of the linear controllers is always limited due to these fundamental frequency- and time-domain limitations. Motivated by the desire to address the fundamental limitations of linear controllers and improve the time-varying closed-loop performance, we put forward a novel setpoint-triggered reset integrator strategy that varies the integrator cut-off frequency based on the setpoint information. Particularly, to tackle the time-varying disturbances and setpoint profiles, the proposed controller consists of a nominal linear controller and a variable-gain reset integrator. We show the global asymptotic stability of the proposed methodology using positive-real lemma along with the LaSalle's invariance principle and experimentally validate using measured frequency response function. Moreover, the efficacy of the proposed technique compared to that of the linear controller is experimentally demonstrated on a benchmark rotary servo system. Experimental results assessed using the tracking error and cumulative power spectral density substantiate that the proposed control strategy can not only improve the low-frequency disturbance rejection but also augment the high-frequency trajectory tracking performance.     

基于MSA的土石坝群体地震易损性研究

针对地震发生后亟需对土石坝群体震害进行快速评估的问题,基于统计数据和MSA方法,提出了土石坝群体震害易损性分析方法。通过分析土石坝群体震害数据,对震损大坝进行等级划分,结合地震破坏损失比和破坏比建立土石坝地震易损性矩阵。并引入MSA方法,建立土石坝群体震害易损性评估模型,计算出四种烈度下易损性参数及易损性曲线和概率,为土石坝群体震害快速评估提供了依据。     

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

Hybrid make-to-stock and make-to-order systems: a taxonomic review

Production planning and control (PPC) systems that employ aspects from both make-to-order (MTO) and make-to-stock (MTS) production control are known as hybrid MTS/MTO systems. While both MTO and MTS separately have been studied extensively, their combined use has received less attention. However, the literature on this topic is growing and this paper shows that the review performed in this paper is an important addition to the field. We categorise relevant literature according to a novel taxonomy and show that hybrid MTS/MTO production control can be used in different contexts. In addition, an overview of the modelling techniques and methods used in these papers is provided. Based on the reviewed literature, relevant research questions and directions for future research are identified. Finally, it is shown that hybrid MTS/MTO production control is prevalent in practice by discussing research with industrial applications. The paper contains an overview of research on hybrid MTS/MTO production control to be used as reference for researchers active in the field, and provides managerial insights and directions for future research on this topic.     

云计算在智慧医院信息服务中的应用

随着医疗服务体系的发展和进步,越来越多的医院开始将云计算技术引入信息服务系统,使医院信息化建设得到了迅速发展。文章分析了云计算技术的特点及其在智能医院信息服务中的应用和影响,以期促进该技术在未来的发展和推广。     

信息技术在医院病案统计中的应用

伴随着我国综合实力的不断提升,信息技术获得了突飞猛进的发展,如今,医疗改革如火如荼地进行,医院的信息管理工作同以往相比较也实现了极大的发展。病案统计工作是指相关工作人员对医院中患者的信息进行全面统计,若是这项工作完成得足够出色,会给医院后续的信息查询工作带来诸多方便和快捷,也能够在某种程度上使医院管理效率和质量实现一定幅度的提升。因此,将信息技术和医院的病案工管理工作进行密切结合,就成为病案管理人员应当重点思考的问题。病案统计工作是医院管理工作中的一个重点环节,病案统计结果能够为医院整体绩效带来十分深远的影响。因此,投入更多时间和精力来提高对这项工作的重视,显得十分关键和重要。文章对信息技术在医院病案统计中的应用展开了分析。     

Artificial pancreas under stable pulsatile MPC: Improving the closed-loop performance

This work presents a pulsatile Zone Model Predictive Control (pZMPC) for the control of blood glucose concentration (BGC) in patients with Type 1 Diabetes Mellitus (T1DM). The main novelties of the algorithm – in contrast to other existing strategies – are: (i) it controls the patient glycemia by injecting short duration insulin boluses for both, the basal and bolus infusions, in an unified manner, (ii) it performs the predictions and estimations (critical to anticipate both, hypo and hyperglycemia) based on a physiological individualized long-term model, (iii) it employs disturbance observers to compensate plant-model mismatches, (iv) it ensures, under standard assumptions, closed-loop stability, and (v) it can be used – under minor modifications – as an optimal basal–bolus calculator to emulate conventional therapies. Because of the latter characteristic, a significantly better performance is achieved, not only in terms of classical indexes (time in the normoglycemia zone, avoidance of hypoglycemia in the short term, avoidance of hyperglycemia in the long term) but also in terms of its applicability (use of the pump or injections). Such a performance is tested in a cohort of in-silico patients from the FDA-accepted UVA/Padova simulation platform, considering the most challenging scenarios.